These instructions will explain how to get Tether onto your Windows
computer. All you need to do is follow the instructions below. If you
have a Mac and need the instructions, click here.
Connect your Android to your computer with the USB cable that
came with your Android. On your Android phone go to Settings >
Applications > Development and check USB debugging.
Once the download completes on your PC, please run the setup and
follow the instructions. At some point you may see a screen that says it
can't verify the publisher, this is because we are using Google's
default Android Drivers. Please be sure to agree and install these
drivers.
During the Install process it will install Tether on your Android over USB.
Run Tether on your PC and on your Android. You will be prompted to select USB. Please go ahead and connect it.
You should now see data/packets flowing on Tether. That means you're connected!
If you're happy with Tether and want to purchase simply visit the following website: http://tether.com/android/order
If you're having problems and not interested in our product, we would appreciate your feedback: http://tether.com/support
The first step to resolve the issue is to try troubleshooting to check what Windows reports.
Click Start go to control Panel, and open Network Connections or Network and Sharing Center
Find and Right click on the active Local Area Connection and choose Properties
Check the Connection Status field and see what it shows and follow the steps accordingly.
If status is ‘Not connected’‘, then follow the steps given below.
Check you network cable, router or modem network and power cables.
Check router or modem connection status (power and internet indicators)
Try a different network adapter (usb, wireless etc.)
If Internet status is ‘Connected’, then try flushing the DNS (Domain Name System).
Follow the steps to flush DNS.
Click Start and go to Run and type cmd and hit enter to open the command prompt or Go to Start then to All programs select Accessories and Command prompt
Type ipconfig /flushdns: and hit enter
After flushing check if problem persists. If it does, check the modem/router connection status indicators.
If status is ‘Limited or no connectivity’,
then unplug the network cable; turn off the router/modem. Go to start
and select Run or Hit Win+R, type ‘cmd’ and hit enter or Start then
select All programs then Accessories and then Command prompt and type
the following commands.
Type ipconfig /release in the command window and hit enter
Type ipconfig /flushdns and hit enter
Type netsh winsock reset hit enter
Type netsh int ip reset c:\resetlog.txt and hit enter
Type netsh int reset all and hit enter
Type netsh routing reset all and hit enter
Type netsh routing dump and hit enter
Plug in network cable and turn on router/modem
Wait for few minutes
Type ipconfig /renew and hit enter.
Upon completion the above process check connection status again. It should say Connected.
If the problem still persists, try turning off your router or modem
and your computer, wait for 20 minutes and then turn everything back on.
If you are connected on the network, but still you are unable to
access the Internet, then you need to check whether the firewall
protection is active or not. It is recommended in XP by Microsoft that
you should never have two firewalls active at the same time. Try
disabling one of the firewall and check whether you can connect to the
Internet or not.
Try undoing the changes that you have recently made on your computer.
If you have installed new OS, then you must download the corresponding
network driver.
Check the network adapter card whether it’s functioning or it. Most
of the time its due to the faulty network card which causes the
connection failure. Try downloading the updated version of the driver.
After following the above-mentioned instructions the local connection
problem will be resolved.
Many users out there must be using and quite familiar with VLC
media player. It is not wrong if I say that it is quite favorite program
for windows users as this allows you to play media files in any format
without adding any codec in the player. This is the reason why it is
considered as the most versatile player for Windows and user friendly.
In this tutorial, I will be telling about how you can play your YouTube
playlist using VLC player.
There are many features of VLC player that are known to very few users.
Well, VLC however allows you to play individual YouTube videos using
VLC’s Media > Open Network Stream feature and this is quite known
feature to many users out there, but have you ever wondered of playing
your YouTube playlist using VLC player.
Previously it was not possible to play a whole YouTube Playlist in
VLC, but it is possible now. However, there are several advantages of
the integration of playlist support to VLC over the playing of videos
over YouTube website.
Upon playing any video on YouTube, is there is no flash player
installed in the system you are not able to play the videos, but playing
a video in VLC, Adobe flash and other plug-ins are not required.
The player also offers versatile playback controls including
filters, options to zoom in or out, or changing a video’s aspect ratio
on the fly.
You might have seen Ads while playing videos on YouTube that are
quite annoying, but playing videos in VLC player, you will not see any
annoying advertisements while watching the video.
You can choose Video > Always on Top inside VLC and the YouTube
video window will stick to the foreground while you work on other tasks.
You can also capture a screenshot of any fame using the Tools > Take Snapshot option.
So, if you are interested in playing YouTube videos in VLC player or
want to integrate this feature in your VLC player, then follow the steps
described here.
Steps to Play YouTube Playlist in VLC player
Firstly, you need to download this script and place it into the VLC playlist folder. This folder can be located under %ProgramFiles%\VideoLAN\VLC\lua\playlist on Windows
Then restart your VLC player.
Now, add the YouTube video in the VLC, press CTRL+N that will open
the network stream window where you need to paste the URL of the video
playlist into the Network URL option
Next, click play and enjoy watching the videos with ease on your desktop.
Upon following all the steps described here you can play any YouTube
playlists on your VLC player and enjoy all the videos on your desktop.
If you begin to experience problems with your keyboard not working or
some of the keys not responding, the first thing you should try is to
Press CTRL+ALT+DEL (all at the same time).
Depending on what version of Windows you have, you should get the
Task List. In Windows 7 you may be given a list with the last option
being Start Task Manager and that is the one you select. A box will pop
up that says Windows Task Manager.
In the image above, you will see a list of all tasks currently
running including this tutorial being created called “Keyboard
Troubleshooting”.
On the right hand side you will see in the title bar, the word
“Status”. Under the Status column it indicates which programs are
running as shown in the below image.
Not the case for the example above, but on your computer check for
any programs that say “Not Responding” and select the first one with a
“Not Responding” status. Next, click the End Task button on the bottom
of the pop-up box as shown here:
Be sure to repeat the process until all tasks labeled “Not
Responding” have ended. You will need to do this one at time.
Periodically check if the keyboard will work properly.
Check the keyboard is properly connected to the computer. If the keyboard has been disconnected, try rebooting the computer. Recommendation
Your keyboard is one of the dirtiest parts of your computer.
Practice cleaning your computer on a regular basis. This will help
maintain your keyboard. You can purchase a can of compressed air to
blow air in the tiny spaces in between your keys to remove small
particles of dust.
If you have tried a number of things and your keyboard is still not
working, disconnect the current one and plug in a keyboard that you know
is working if one is available. This may determine if you need to get
a new keyboard or if you have a central processing unit (CPU) problem.
Click the
“Start” button and type “msconfig” in the text box on the Start menu.
Press the “Enter” key to launch the “System Configuration” tool. You
will see a number of tabs on this window. Both the “Startup” and the
“Services” tabs are important to this process.
Click the
“Startup” tab to view a list of programs that start up with Windows 7.
Some programs may be obviously named, while others you may not
recognize. As a rule of thumb, you should only disable programs you are
certain about to prevent unexpected software failure. Placing a check in
the box next to the program name causes the program to launch with
Windows 7. Removing the check in the box prevents the program from
launching.
Click the
“Services” tag, then select the “Hide all Microsoft services” option in
the bottom left corner. This ensures you don’t disable a service
required by Windows. You will now see only the third-party services that
launch when Windows 7 starts. Remove the check in the box next to any
services you know that you don’t need. Click “OK” to make the changes,
then reboot your Windows 7 computer when prompted.
This Guide is help these people who forget his password and surfer with data lost problem. 1. Boot from Windows CD/DVD and access the command prompt. Insert bootable cd to pc----> press F10/F12 to boot from CD --> choose CD/DVD Drive and Enter-----> Install now ----> Repair your PC-----> Next------> Choose Command Prompt from System Recovery option----> use following Command in command prompt. 2. Find the drive letter of the partition where Windows is installed. (Replace “c:” with the correct drive letter if Windows is not located on C:) 3. These commands make a backup of sethc.exe to restore later. c:\>copy c:\windows\system32\sethc.exe c:\ 4. Type this command to replace sethc.exe with cmd.exe: c:\>copy /y c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe 5. Reboot your computer and start the Windows. After you see the logon screen, press the SHIFT key five times.
6. You should see a command prompt where you can enter the following command to reset the Windows password (see screenshot above): c:\>net user your_user_name new_password 7. If you don’t know your user name, just type command net user to list the available user names. 8. You can now log on with the new password.
How to boost internet speed in your computer? , you can increase your speed up to 20% . How ? Microsoft reserves 20% of your bandwidth for windows updates or online usage. You can disable it and also set in 0 . You can make your internet connection faster How doing it? Here are the simple steps
Here are the steps
Click start button then type gpedit. msc and open it, now a new window will open
Then Click to Computer Configuration then Click to Admistrative Templates
Open the Network folder then go to QoS Packet Scheduler
After the open qos packet scheduler , then open Limit Reservable Bandwidth now new window will appear
And select enable and bandwidth limit set in 0 %
Click ok, you are Done!
Please leave comments , your feedback is valuable to us Don't forget to
How can I change the language of the subtitles?, today, I am going to share with you how to change the language of the gta. Everyone likes to play guitar game, is it your subtitles in English or other language
>>> Download GTA language pack
>>> Then Go to GTA game folder
>>> Now you can see the text folder
>>> open it and paste your downloaded language pack
Hey Friends today we will see how to format usb flash drive using MS-DOS. many times we need to format our usb drives, people find it difficult so today reading this article you will be able to format you usb very easily,lets see the steps
1) Click Start > Run... and type cmd in the box then Click OK
2) The command prompt window appears.
3) Type the following command: format X: Note: Replace "X:" with the letter of your USB Flash Drive. You can use "diskpart" to list all drive letters.
4) If you want to format it as FAT32 then type: format X: /FS:FAT32
5) After typing one of the above commands, press Enter
6) When it asks for pressing Enter again, just press it to confirm.
7) It will prompt you to enter a name for the drive, write it and hit Enter
NTFS(NT File System) is the standard file sytem for Microsoft’s Windows XP and Windows Vista operating systems.NTFS file system provides more stability, security and less fragmentation than previous FAT(File Allocation Table) file system used in operating systems like MS-DOS,Windows 98,Windows ME etc.
NTFS is the recommended file system for Windows XP and Windows Vista operating systems because it’s is more powerful than FAT or FAT32 file systems used in former Windows OS’s, and includes features required for hosting Active Directory as well as other important security features.Windows Vista needed NTFS file system in order to install and we can’t install Windows Vista on a FAT partition.
Converting a partition from FAT or FAT32 to NTFS can be done by an inbuilt utility(convert.exe) in the Windows XP operating system.So if you want increased security and faster data encryption,go ahead and convert to NTFS.
To convert a FAT partition to NTFS, perform the following steps.
1.Click Start, point to Programs, point to Accessories, and then click Command Prompt.
2.In the command prompt window, type: convert drive_letter: /fs:ntfs
3.After doing this the inbuilt utility, convert.exe will attempt to convert the drive for you.
For example,running the command convert E: /fs:ntfs would format drive E: to the NTFS format.You can convert FAT or FAT32 volumes to NTFS with this command. Warning:
*This is a one-way conversion.Once you convert a drive or partition to NTFS, you cannot simply convert it back to FAT or FAT32. You will need to reformat the drive or partition which will erase all data, including programs and personal files, on the partition.
*Make sure there is minimum 3% free space on hard disk drive partitions for proper conversion. Note:
*Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command
Step 2. Save As An EXE Any Name Will Do
Step 3. Send the EXE to People And Infect+
OR
IF u think u cannot format c driver
when windows is running try Laughing and u will get it Razz .. any way
some more so u can test on other drives this is simple binary code
IMPORTANT : This Trick is for Educational Purpose
only.DONT TRY ON YOUR OWN PC TRY WITH
YOUR OWN RISK.It lead to loss of data and crashing your computer..!!
Complete and capable data recovery software for rescuing files under almost any conditions including: accidentally deleted files; damaged or formatted hard drive; lost/deleted partition; photo or video lost from local drive, memory card, or camera; file lost from mobile phones, etc.
There are a number of ways to gain access to a password-protected administrator account. I'll offer two.
The first one is quick and easy, but only works in XP. If the used PC runs Vista or Windows 7, skip the next three paragraphs.
XP
contains a backdoor entrance to administrator control. The following
will only work if the previous owner didn't know enough to close the
backdoor.
First, boot into Safe Mode: Start your PC, and press F5 before the Windows logo appears. (It may take a few tries to get the timing right.) From the resulting Boot menu, select Safe Mode.
When the logon screen appears, it will probably contain a user you've
never seen before, Administrator, that does not have a password. Thus,
you can enter Windows as an administrator-level user.
Once inside Windows, you can use Control Panel's User Accounts
applet to change the password on the other administrator account or
create a new one for yourself. And while you're there, you might also
want to add a password to the Administrator account in order to close
the backdoor. But that's probably the case.
If you're using Vista or Windows 7, or if someone closed that
backdoor already, you can remove the administrator password with Ubuntu
Linux. This gets a little complicated, so follow it closely.
If you don't already have a live Ubuntu Linux CD, download the current version.
Double-click the just-downloaded .iso file. Windows might start a
program that burns your Ubuntu CD. If it doesn't, download and install ISO Recorder, then try again. Simply copying the .iso file to a CD won't work.
The instructions below are based on Ubuntu version 10.04.1 LTS--the most current version as I write this.
Once you've created the disc, boot off the CD. When asked, click the Try Ubuntu button.
You'll first need to install the software: From the menus in the top-right corner of the screen, select System, Administration, Software Sources.
In the resulting window, check the two options not yet checked: Community-maintained Open Source software (universe) and Softrware restricted by copyright or legal issues (multiverse). Click Close, then Reload.
After the program is done processing, select System, Administration, and Synaptic Package Manager from the top-right corner menus.
In the resulting window's Search field, enter chntpw. A program with that name should appear in the list of packages below. Click it and select Mark for installation. Click the Apply toolbar icon. Click Apply, and wait until the installation is complete.
Now mount your drive: From the top menus, select Places, then
your internal hard drive or Windows partition. When it's mounted, a
File Browser window (much like Windows Explorer) will appear.
By double-clicking the folder icons, go to the Windows drive's Windows\system32\config folder. Leave this window up.
Now you can remove the password.
From the top menus, select Applications, Accessories, Terminal. This brings up a black window similar to Windows' command line (or the DOS box for you old-timers).
Arrange these two windows so that you can see the top section of the File Browser window behind the Terminal window.
In the Terminal command line window, type cd /media/
(note the SPACE after cd) and the path to your config folder, using the
folder names at the top as a guide. I wish I could simply tell you to
type "cd /media/windows/system32/config", but unlike the Windows command
line, Ubuntu's Terminal is case sensitive. Depending on what version of
Windows you're trying to reclaim, it may be windows/system32 or
Windows/System32, and Ubuntu won't see it if you get the case wrong.
When it's typed, press ENTER.
Now type sudo chntpw -u logon SAM, where logon is the logon name for the administrator account. For instance, if you're trying to take over my account, you'd enter sudo chntpw -u Lincoln SAM. Remember, everything here is case sensitive, including the logon name.
After you hit ENTER, a lot of text will scroll up
very quickly. If you entered the text correctly, the last section will
begin ". . . . User Edit Menu:"
Now press 1 (the number, not lower-case L), then ENTER.
At the resulting question, press y.
When the program is done, click the power button logo in the
upper-right corner and reboot into Windows. The account in question will
no longer require a password
